Soft start motion detector with integrated temperature sensor for heaters up to 4000 watts for installation under the table
The heater controller is part of a family of controllers designed to provide energy saving when used with Quartz Infrared Halogen Lamps. The heater controller has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the heater controller, a temperature sensor monitors the temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 18°C and 24°C.
The microcontroller-based system incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current –potentially increasing lamp life by as much as 30%. The lamps are switched on for a fixed time period of 5 minutes. This period is reset each time the heater controller detects any further movement. Installation of the unit is simple and once installed is relatively maintenance-free.
Applications: Under table, under desks.Product Features
· Energy saving – only provides heat when people are present.
· Extends lamp Life.
· Temperature Sensor – lamps inhibited when ambient temperature exceeds set point.
· Soft-start/zero-voltage switch-off.
· Easy to install.
Supply Voltage: 230VAC +/- 10% @ 50/60Hz Guarantee device:
Switching Capacity: 4kW Max.
Detection Range: 5 metres
Tolerance: +/- 1°C
Settling Time: ≤ 20 seconds
Detection Angle: 100°
Temperature Set Point: 18 to 24°C
Lamp On-Time: 5 Minutes (fixed)
Current Consumption (control circuit): 50mA
Terminals: 2.5mm2 Rising Clamp
Operating Temperature: -20 to 40°C
Gland Diameter: Max Cable Entry 2.5mm²
Enclosure Dimensions (WxLxH): 100 x 112 x 55 (mm)
DOWNLOADS: Manuals and technical documentations
Delivery time: 1 – 2 working days, Express 1 day*
*valid for deliveries in Germany and Austria if product is in stock.